The front of the mini coming off
The front showing how much +90mm looks like
Modified front panal
Front end tacked in place
Front end tacked in place
Right wing with spacer plate welded in place, difference in water channel can be seen
Left wing with spacer plate welded in place
Left wing with water channel welded in place
Right wing with water channel welded in place
Right side in primer to stop rust until filler added
Left side in primer to stop rust until filler added
Front end with wings extended, modified water channels can be clearly seen
Front end with wings extended
Extended wings with standard bonnet in place
Side view of extended wings and standard bonnet
Front wings with filler and first coat of primer
Left wing
Right wing
Under wing, seam sealer applied to all joints
Under wing, seam sealer applied to all joints
Bonnet extension, still needs some work as the back edge is to high when fitted
Bonnet with half a tin of filler !
Underneath of bonnet, thin steel covers have been fitted to cover the hindge area
Here it is in primer
Here it is in primer
Here's the underneath of bonnet in primer
Here's the bonnet fitted
Here's the compressor - £99 from screwfix, 24L, 2HP, 8cfm, 118psi.
Plastic sheet to seperate the tools and dust from the car.
Masked up ready for primer.
Masked up ready for primer.
Here it is with primer done.
Bonnet in primer.
Here she is painted.
Here she is painted.
